# Makefile.in generated by automake 1.9.6 from Makefile.am.
# external/Makefile.  Generated from Makefile.in by configure.

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005  Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.



#
# Copyright (C) 2008 Search Solution Corporation. All rights reserved by Search Solution. 
#
#   This program is free software; you can redistribute it and/or modify 
#   it under the terms of the GNU General Public License as published by 
#   the Free Software Foundation; either version 2 of the License, or
#   (at your option) any later version. 
#
#  This program is distributed in the hope that it will be useful, 
#  but WITHOUT ANY WARRANTY; without even the implied warranty of 
#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 
#  GNU General Public License for more details. 
#
#  You should have received a copy of the GNU General Public License 
#  along with this program; if not, write to the Free Software 
#  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
#
srcdir = .
top_srcdir = ..

pkgdatadir = $(datadir)/cubrid
pkglibdir = $(libdir)/cubrid
pkgincludedir = $(includedir)/cubrid
top_builddir = ..
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = /usr/bin/install -c
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = x86_64-redhat-linux-gnu
host_triplet = x86_64-redhat-linux-gnu
target_triplet = x86_64-redhat-linux-gnu
subdir = external
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
	$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
	html-recursive info-recursive install-data-recursive \
	install-exec-recursive install-info-recursive \
	install-recursive installcheck-recursive installdirs-recursive \
	pdf-recursive ps-recursive uninstall-info-recursive \
	uninstall-recursive
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = ${SHELL} /home/bwkim/work/PHP/cubrid-php-7/cci-src/config/missing --run aclocal-1.9
AMDEP_FALSE = #
AMDEP_TRUE = 
AMTAR = ${SHELL} /home/bwkim/work/PHP/cubrid-php-7/cci-src/config/missing --run tar
ANT = 
AR = ar
AUTOCONF = ${SHELL} /home/bwkim/work/PHP/cubrid-php-7/cci-src/config/missing --run autoconf
AUTOHEADER = ${SHELL} /home/bwkim/work/PHP/cubrid-php-7/cci-src/config/missing --run autoheader
AUTOMAKE = ${SHELL} /home/bwkim/work/PHP/cubrid-php-7/cci-src/config/missing --run automake-1.9
AWK = gawk
BISON = 
BIT_MODEL = -m64
BROKER_ADMIN_LIB = $(top_builddir)/broker/libbrokeradmin.la
BUILD_64_FALSE = #
BUILD_64_TRUE = 
BUILD_CMSERVER_FALSE = 
BUILD_CMSERVER_FOR_AIX_FALSE = 
BUILD_CMSERVER_FOR_AIX_TRUE = #
BUILD_CMSERVER_TRUE = #
BUILD_COVERAGE_FALSE = 
BUILD_COVERAGE_TRUE = #
BUILD_DEBUG_FALSE = 
BUILD_DEBUG_TRUE = #
BUILD_NUMBER = 10.0.0.1351
BUILD_SUBDIRS = external include cci
CAS_LIB = $(top_builddir)/cas/libcas.la
CC = gcc
CCDEPMODE = depmode=gcc3
CCI_LIB = $(top_builddir)/cci/libcascci.la
CFLAGS =  -Wall -W -Wwrite-strings -Wno-cast-qual -Wmissing-prototypes -Wredundant-decls -Wlong-long -Wextra -Wno-unused -ggdb -O2 -DNDEBUG -finline-functions -fno-omit-frame-pointer
COMMON_DEFS = -DANSI=1 -DSYSV -DMAXPATHLEN=1024 -D_REENTRANT
CONFIG_STATUS_DEPENDENCIES = $(top_srcdir)/BUILD_NUMBER
CPP = gcc -E
CPPFLAGS = 
CS_DEFS = -DCS_MODE
CS_LIB = $(top_builddir)/cs/libcubridcs.la
CUBRID_COMPATDIR = $(prefix)/compat
CUBRID_CONFDIR = $(prefix)/conf
CUBRID_DEMODIR = $(prefix)/demo
CUBRID_JAVADIR = $(prefix)/java
CUBRID_JDBCDIR = $(prefix)/jdbc
CUBRID_LIB = $(top_builddir)/cubrid/libcubrid.la
CUBRID_LOCALEDIR = $(prefix)/msg
CUBRID_LOGDIR = 
CUBRID_SHLOCALESDIR = $(prefix)/locales
CUBRID_TMPDIR = 
CUBRID_TZ_DIR = $(prefix)/timezones
CXX = g++
CXXCPP = g++ -E
CXXDEPMODE = depmode=gcc3
CXXFLAGS =  -Wall -W -Wwrite-strings -Wno-cast-qual -Wredundant-decls -Wlong-long -Wextra -Wno-unused -ggdb -O2 -DNDEBUG -finline-functions -fno-omit-frame-pointer
CYGPATH_W = echo
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
DIFF = diff
DIR_DEFS = -DCUBRID_PREFIXDIR=\"$(prefix)\" -DCUBRID_BINDIR=\"$(bindir)\" -DCUBRID_LIBDIR=\"$(libdir)\" -DCUBRID_VARDIR=\"$(localstatedir)\" -DCUBRID_CONFDIR=\"$(prefix)/conf\" -DCUBRID_JAVADIR=\"$(prefix)/java\" -DCUBRID_JDBCDIR=\"$(prefix)/jdbc\" -DCUBRID_LOCALEDIR=\"$(prefix)/msg\" -DCUBRID_SHLOCALESDIR=\"$(prefix)/locales\" -DCUBRID_LOGDIR=\"$(prefix)/log\" -DCUBRID_TMPDIR=\"$(prefix)/tmp\" -DCUBRID_TZ_DIR=\"$(prefix)/timezones\"
DISABLE_CUBRIDENV_FALSE = 
DISABLE_CUBRIDENV_TRUE = #
DTRACE = 
ECHO = echo
ECHO_C = 
ECHO_N = -n
ECHO_T = 
EGREP = /bin/grep -E
ENABLE_SYSTEMTAP_FALSE = 
ENABLE_SYSTEMTAP_TRUE = #
ESQL_LIB = $(top_builddir)/util/libcubridesql.la
EXEEXT = 
EXPAT_LIBS = 
EXTERNAL_DIST = 
EXTERNAL_PKGS =  libregex38a
EXTRA_DIST_SUBDIRS = 
EXT_INC =    -I$(top_builddir)/external/include/libregex38a    
EXT_LIBS =    $(top_builddir)/external/libregex38a/libregex38a.la    
F77 = gfortran
FFLAGS = -g -O2
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s
JANSSON_LIBS = 
JAVA_HOME = /usr/lib/jvm/java-1.6.0
JAVA_INC = 
LDFLAGS =  -Wl,--hash-style=both
LEX = flex
LEXLIB = 
LEX_OUTPUT_ROOT = lex.yy
LIBOBJS =  ${LIBOBJDIR}strlcpy$U.o ${LIBOBJDIR}strlcat$U.o
LIBS = -lgpg-error -lgcrypt -lstdc++ -lcurses -lpthread -ldl -lm 
LIBTOOL = $(SHELL) $(top_builddir)/libtool
LN_S = ln -s
LTLIBOBJS =  ${LIBOBJDIR}strlcpy$U.lo ${LIBOBJDIR}strlcat$U.lo
LT_VERSION = 10:0:0
MAKEINFO = ${SHELL} /home/bwkim/work/PHP/cubrid-php-7/cci-src/config/missing --run makeinfo
NBASE_T_INC_PATH = 
NBASE_T_LIB_PATH = 
OBJEXT = o
PACKAGE = cubrid
PACKAGE_BUGREPORT = 
PACKAGE_NAME = CUBRID
PACKAGE_STRING = CUBRID 10.0
PACKAGE_TARNAME = cubrid
PACKAGE_VERSION = 10.0.0.1351
PATH_SEPARATOR = :
PRODUCT_STRING = 
RANLIB = ranlib
SA_DEFS = -DSA_MODE
SA_LIB = $(top_builddir)/sa/libcubridsa.la
SED = /bin/sed
SERVER_DEFS = -DSERVER_MODE
SET_MAKE = 
SHELL = /bin/sh
SRC_INC = -I$(top_srcdir)/include -I$(top_srcdir)/src/api -I$(top_srcdir)/src/base -I$(top_srcdir)/src/broker -I$(top_srcdir)/src/cci -I$(top_srcdir)/src/compat
STRIP = strip
SYS_DEFS = -DGCC -DLINUX -D_GNU_SOURCE -DI386 -DX86
SYS_LIBS = 
USE_BISON_NEWDIRECTIVE_FALSE = 
USE_BISON_NEWDIRECTIVE_TRUE = #
VERSION = 10.0.0.1351
VERSION_DEFS = -DMAJOR_VERSION=10 -DMINOR_VERSION=0 -DPATCH_VERSION=0 -DRELEASE_STRING=10.0.0 -DMAJOR_RELEASE_STRING=10.0 -DBUILD_NUMBER=10.0.0.1351 -DBUILD_OS='linux_gnu'
XOPEN_DEFS = -D_XOPEN_SOURCE
YACC = bison -y
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = gcc
ac_ct_CXX = g++
ac_ct_F77 = gfortran
ac_ct_RANLIB = @ac_ct_RANLIB@
ac_ct_STRIP = @ac_ct_STRIP@
am__fastdepCC_FALSE = #
am__fastdepCC_TRUE = 
am__fastdepCXX_FALSE = #
am__fastdepCXX_TRUE = 
am__include = include
am__leading_dot = .
am__quote = 
am__tar = tar --format=ustar -chf - "$$tardir"
am__untar = tar -xf -
bindir = ${exec_prefix}/bin
build = x86_64-redhat-linux-gnu
build_alias = 
build_cpu = x86_64
build_os = linux-gnu
build_vendor = redhat
datadir = ${prefix}/share
exec_prefix = ${prefix}
host = x86_64-redhat-linux-gnu
host_alias = 
host_cpu = x86_64
host_os = linux-gnu
host_vendor = redhat
includedir = ${prefix}/include
infodir = ${prefix}/share/info
install_sh = /home/bwkim/work/PHP/cubrid-php-7/cci-src/config/install-sh
libdir = ${exec_prefix}/lib
libexecdir = ${exec_prefix}/libexec
localstatedir = ${prefix}/var
mandir = ${prefix}/share/man
mkdir_p = mkdir -p --
oldincludedir = /usr/include
prefix = /home/bwkim/cubrid
program_transform_name = s,x,x,
sbindir = ${exec_prefix}/sbin
sharedstatedir = ${prefix}/com
subdirs =  external/libregex38a
sysconfdir = ${prefix}/etc
target = x86_64-redhat-linux-gnu
target_alias = 
target_cpu = x86_64
target_os = linux-gnu
target_vendor = redhat
AUTOMAKE_OPTIONS = foreign -Wno-override
SUBDIRS =  libregex38a
EXTRA_DIST = 
all: all-recursive

.SUFFIXES:
$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  external/Makefile'; \
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --foreign  external/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure:  $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

distclean-libtool:
	-rm -f libtool
uninstall-info-am:

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
	@failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
	@failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	rev=''; for subdir in $$list; do \
	  if test "$$subdir" = "."; then :; else \
	    rev="$$subdir $$rev"; \
	  fi; \
	done; \
	rev="$$rev ."; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done
ctags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
	done

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	mkid -fID $$unique
tags: TAGS

TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	    $$tags $$unique; \
	fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	test -z "$(CTAGS_ARGS)$$tags$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$tags $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && cd $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) $$here

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

distdir: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
	list='$(DISTFILES)'; for file in $$list; do \
	  case $$file in \
	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
	  esac; \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
	    dir="/$$dir"; \
	    $(mkdir_p) "$(distdir)$$dir"; \
	  else \
	    dir=''; \
	  fi; \
	  if test -d $$d/$$file; then \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test -d "$(distdir)/$$subdir" \
	    || $(mkdir_p) "$(distdir)/$$subdir" \
	    || exit 1; \
	    distdir=`$(am__cd) $(distdir) && pwd`; \
	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
	    (cd $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$$top_distdir" \
	        distdir="$$distdir/$$subdir" \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
check-am: all-am
check: check-recursive
all-am: Makefile all-local
installdirs: installdirs-recursive
installdirs-am:
install-exec: install-exec-recursive
install-data: install-data-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive

clean-am: clean-generic clean-libtool clean-local mostlyclean-am

distclean: distclean-recursive
	-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-libtool \
	distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

info: info-recursive

info-am:

install-data-am:

install-exec-am:

install-info: install-info-recursive

install-man:

installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am: uninstall-info-am

uninstall-info: uninstall-info-recursive

.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am all-local check \
	check-am clean clean-generic clean-libtool clean-local \
	clean-recursive ctags ctags-recursive distclean \
	distclean-generic distclean-libtool distclean-recursive \
	distclean-tags distdir dvi dvi-am html html-am info info-am \
	install install-am install-data install-data-am install-exec \
	install-exec-am install-info install-info-am install-man \
	install-strip installcheck installcheck-am installdirs \
	installdirs-am maintainer-clean maintainer-clean-generic \
	maintainer-clean-recursive mostlyclean mostlyclean-generic \
	mostlyclean-libtool mostlyclean-recursive pdf pdf-am ps ps-am \
	tags tags-recursive uninstall uninstall-am uninstall-info-am


install: all-am
	@echo "Nothing to be installed for external packages."

uninstall: clean-local-check
	@list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making uninstall in $$subdir"; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="" uninstall) \
	done;

all-local:
	@list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test -f $$subdir/.installed; then \
	    echo "Skip install in $$subdir"; continue; \
	  fi; \
	  echo "Making install in $$subdir"; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="" install) \
	  && touch $$subdir/.installed || exit 1; \
	done;

clean-local: clean-local-check
.PHONY: clean-local-check
clean-local-check:
	@list='$(SUBDIRS)'; for subdir in $$list; do \
	  (cd $$subdir && rm -f .installed) \
	done;
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
